Skip to content

You are here: Home / Doctoral programmes / Optical Engineering

Optical Engineering

The aim of the doctoral programme is to provide training leading to a doctoral degree for Spanish and international students who have completed a university qualification in the field of optics and optometry. The students could prepare a doctoral thesis in an area of optics and optometry and will benefit from the experience of the various research groups that work in these fields.

The growing impact of optics and optometry make doctoral training in this field increasingly necessary and attractive, to develop a high-level of specialisation in associated areas. To develop this high-quality, multidisciplinary doctoral programme, the knowledge of various departments and research groups was required, so that more aspects of optical engineering and optometry could be addressed.

COORDINATOR

Quevedo Junyent, Lluïsa

CONTACT

(+34) 937 398 353

Programme website

General information

Access profile

Given the multidisciplinary nature of the scientific field of the programme, there are a wide range of degrees that qualify applicants for admission. The most suitable prior learning to enter the doctoral programme in Optical Engineering will correspond, in the near future, to graduates with science and technology backgrounds who have taken the master's degree in Photonics, the master's degree in Optometry and Vision Sciences or a master’s degree related to the scientific area of the programme. In addition to this academic background, certain personal characteristics are considered important, such as interest in the research projects that are developed in the programme, critical and analytical capacity, taking initiative, perseverance and persistence in work, and the capacity to work in a team and communicate well in spoken and written form.

The main master’s degrees that provide direct access and do not require bridging courses are:

• master's degree in Photonics
• Erasmus Mundus doctoral degree in Photonics Engineering, Nanophotonics and Biophotonics
• master's degree in Optometry and Vision Sciences
• master's degree in Bioengineering
• master's degree in Biomedical Engineering
• European Master of Science in Research on Information and Communication Technologies

If students have a master’s degree in a science or technology area other than the above, the academic committee of the doctoral programme will check the subjects that have been taken in their previous studies and assess their relation with the area of optics to establish whether the student needs to take bridging courses.

Output profile

Doctoral candidates who complete a doctoral degree will have acquired the following competencies, which are needed to carry out quality research (Royal Decree 99/2011, of 28 January, which regulates official doctoral studies):

a) A systematic understanding of the field of study and a mastery of the research skills and methods related to the field.
b) An ability to conceive, design or create, put into practice and adopt a substantial process of research or creation.
c) An ability to contribute to pushing back the frontiers of knowledge through original research.
d) A capacity for critical analysis and an ability to assess and summarise new and complex ideas.
e) An ability to communicate with the academic and scientific community and with society in general as regards their fields of knowledge in the manner and languages that are typical of the international scientific community to which they belong.
f) An ability to foster scientific, technological, social, artistic and cultural progress in academic and professional contexts within a knowledge-based society.

The award of a doctoral degree must equip the graduate for work in a variety of settings, especially those requiring creativity and innovation. Doctoral graduates must have at least acquired the personal skills needed to:

a) Develop in contexts in which there is little specific information.
b) Find the key questions that must be answered to solve a complex problem.
c) Design, create, develop and undertake original, innovative projects in their field.
d) Work as part of a team and independently in an international or multidisciplinary context.
e) Integrate knowledge, deal with complexity and make judgements with limited information.
f) Offer criticism on and intellectually defend solutions.

On completion, doctoral students should show that they have the following competences:
a) Have gained advanced knowledge in the frontier of knowledge and have demonstrated, in the context of internationally recognised science, in-depth understanding based on theoretical and practical aspects and on scientific methodology in one or more research areas.
b) Have made an original, significant contribution to scientific research in their field of knowledge and this contribution has been recognised as such by the international scientific community.
c) Have demonstrated that they can design a research project to carry out a critical analysis and assessment of ambiguous situations in which to apply their contributions, knowledge and work methodology to synthesise new, complex ideas that generate deeper knowledge of the research context in which they work.
d) Have developed sufficient independence to start, manage and lead teams and innovative research projects and national and international scientific collaborations within their subject area in multidisciplinary contexts and, when applicable, with a high component of knowledge transfer.
e) Have demonstrated that they can carry out their research activity with social responsibility and scientific integrity.
f) Have demonstrated within the specific scientific context that they can make advances in cultural, social or technological aspects, and promote innovation in all areas in a knowledge-based society.
g) Have proven that they can participate in scientific discussions that take place at international level in their knowledge area and disseminate the results of their research activity to all kinds of audiences.

Number of places

6

Duration of studies and dedication regime

Duration
The maximum period of study for full-time doctoral studies is three years, counted from the date of admission to the programme to the date of submission of the doctoral thesis. The academic committee of the doctoral programme may authorise a doctoral candidate to pursue doctoral studies on a part-time basis. In this case, the maximum period of study is five years, counting from the date of admission to the programme to the date of submission of the doctoral thesis. For calculating these periods, the date of admission is considered to be the date of the first enrolment for tutorials, and the date of submission the moment in which the Doctoral School officially deposits the doctoral thesis.

For full-time doctoral candidates, the minimum period of study is two years, counted from the date of an applicant's admission to the programme until the date on which the doctoral thesis is deposited; for part-time doctoral candidates it is four years. When there are justified grounds for doing so, and the thesis supervisor and academic tutor have given their authorisation, doctoral candidates may request that the academic committee of their doctoral programme exempt them from the minimum period of study requirement.

The calculation of periods of study will not include periods of absence due to illness, pregnancy or any other reason provided for in the regulations in force. Students who find themselves in any of these circumstances must notify the academic committee of the doctoral programme, which, where appropriate, must inform the Doctoral School. Doctoral candidates may also temporarily withdraw from the programme for up to one year, and this period may be extended for an additional year. Doctoral candidates who wish to interrupt their studies must submit a justified request to the academic committee of the doctoral programme, which will decide whether or not to approve the request. Each programme will establish conditions for readmission to doctoral studies.

Extension
If full-time doctoral candidates have not applied to deposit their thesis by the end of the three-year period of study, the academic committee of the programme may authorise an extension of up to one year. In exceptional circumstances, a further one-year extension may be granted, subject to the conditions established by the corresponding doctoral programme. In the case of part-time doctoral candidates, an extension of two years may be authorised. In both cases, in exceptional circumstances a further one-year extension may be granted by the Doctoral School's Standing Committee, upon the submission of a reasoned application by the academic committee of the doctoral programme.

Dismissal from the doctoral programme
A doctoral candidate may be dismissed from a doctoral programme for the following reasons:

  • The doctoral candidate submitting a justified application to withdraw from the programme.
  • The maximum period of study and of extensions thereof ending.
  • The doctoral candidate not having enrolled every academic year (unless he or she has been authorised to temporarily withdraw).
  • The doctoral candidate failing two consecutive assessments.
  • The doctoral candidate having disciplinary proceedings filed against him or her that rule that he or she must be dismissed from the UPC.

Dismissal from the programme implies that doctoral candidates cannot continue studying at the UPC and the closing of their academic record. This notwithstanding, they may apply to the academic committee of the programme for readmission and the committee must reevaluate them in accordance with the criteria established in the regulations.

Organization

COORDINATOR:
ACADEMIC COMMISSION OF THE PROGRAM:
STRUCTURAL UNITS:
  • Department of Optics and Optometry (PROMOTORA)
  • Department of Electronic Engineering
  • Department of Optics and Optometry
  • Department of Physics
Specific URL of the doctoral program:
https://opticalengineering.phd.upc.edu/es

CONTACT:

(+34) 937 398 353


Access, admission and registration

Access profile

Given the multidisciplinary nature of the scientific field of the programme, there are a wide range of degrees that qualify applicants for admission. The most suitable prior learning to enter the doctoral programme in Optical Engineering will correspond, in the near future, to graduates with science and technology backgrounds who have taken the master's degree in Photonics, the master's degree in Optometry and Vision Sciences or a master’s degree related to the scientific area of the programme. In addition to this academic background, certain personal characteristics are considered important, such as interest in the research projects that are developed in the programme, critical and analytical capacity, taking initiative, perseverance and persistence in work, and the capacity to work in a team and communicate well in spoken and written form.

The main master’s degrees that provide direct access and do not require bridging courses are:

• master's degree in Photonics
• Erasmus Mundus doctoral degree in Photonics Engineering, Nanophotonics and Biophotonics
• master's degree in Optometry and Vision Sciences
• master's degree in Bioengineering
• master's degree in Biomedical Engineering
• European Master of Science in Research on Information and Communication Technologies

If students have a master’s degree in a science or technology area other than the above, the academic committee of the doctoral programme will check the subjects that have been taken in their previous studies and assess their relation with the area of optics to establish whether the student needs to take bridging courses.

Access requirements

Applicants must hold a Spanish bachelor’s degree or equivalent and a Spanish master’s degree or equivalent, provided they have completed a minimum of 300 ECTS credits on the two degrees (Royal Decree 43/2015, of 2 February)

In addition, the following may apply:

  • Holders of an official degree awarded by a university in Spain or any other country in the European Higher Education Area, pursuant to the provisions of Article 16 of Royal Decree 1393/2007, of 29 October, which establishes official university course regulations, who have completed a minimum of 300 ECTS credits on official university degrees, of which at least 60 must be at the master's degree level.
  • Holders of an official Spanish bachelor’s degree comprising at least 300 credits, as provided for by EU regulations. Holder of degrees of this kind must complete bridging courses unless the curriculum of the bachelor’s degree in question included research training credits equivalent in value to those which would be earned on a master's degree.
  • Holders of an official university qualification who, having passed the entrance examination for specialised medical training, have completed at least two years of a training course leading to an official degree in a health-sciences specialisation.
  • Holders of a degree issued under a foreign education system. In these cases, homologation is not required, but the UPC must verify that the degree certifies a level of training equivalent to an official Spanish master's degree and qualifies the holder for admission to doctoral studies in the country where it was issued. Admission on this basis does not imply homologation of the foreign degree or its recognition for any purpose other than admission to doctoral studies.
  • Holders of a Spanish doctoral qualification issued under previous university regulations.
  • Note 1: Doctoral studies entrance regulations for holders of an undergraduate degree awarded before the introduction of the EHEA (CG 47/02 2014)

    Note 2: Governing Council Decision 64/2014, which approves the procedure and criteria for assessing the fulfilment of academic admission requirements for doctoral studies by holders of non-homologated foreign degrees (CG 25/03 2014)

Admission criteria and merits assessment

The academic committee of the doctoral programme in Optical Engineering will apply the following selection and weighting criteria. At all times it will respect the principles of merit and equal opportunities:

• Academic record (weighting: 55%).
• Contact through interviews (personal, telephone, internet, etc.) (weighting: 10%).
• Motivation (weighting: 15%).
• Language knowledge (weighting: 10%).
• Research experience (weighting: 5%).
• Related completed postgraduate programmes (weighting: 5 %).
Personal contact is made through an interview in which the applicant’s attitude, interest in the subject, ability to work in a team and spoken communication skills are assessed, among other factors. As many applicants are living in other countries when they apply for admission to the programme, interviews can be carried out from a distance using the new tools provided by the internet.

Motivation will be assessed in a written report in which students should describe their personal, professional and academic reasons for requesting admission to the programme. This report should be attached on the admissions intranet system.

In the section on language knowledge, merit will be given for languages that are of interest to the programme such as English, Spanish and Catalan.

Training complements

The academic committee for the programme may require that doctoral students pass specific bridging courses. In this case, it will monitor the bridging courses that are taken and establish suitable criteria to limit their duration.

The bridging courses will be on research training, but doctoral students will never be asked to enrol for a number equal to or above 60 ECTS. The academic regulations of doctoral studies state that bridging courses may also be cross-disciplinary. However, this point is likely to be amended so that bridging courses are only associated with research credits, particularly when an applicant enters the doctoral programme with a bachelor’s degree worth 300 ECTS.

Considering the doctoral student activity report (DAD), the academic committee of the programme could propose additional measures to those established in the regulations that lead to the withdrawal of doctoral students who do not meet the established criteria.

The university master’s degrees that provide direct access to the programme without the need for bridging courses are:

• master's degree in Photonics
• Erasmus Mundus doctoral degree in Photonics Engineering, Nanophotonics and Biophotonics
• master's degree in Optometry and Vision Sciences.
• master's degree in Bioengineering
• master's degree in Biomedical Engineering
• European Master of Science in Research on Information and Communication Technologies

Students who hold a master’s degree in science and technology subjects other than the above, such as:
- master’s degree in the areas of industrial engineering, computer engineering or equivalent
- master’s degrees in the areas of physical sciences, biomedicine or equivalents

The academic committee of the doctoral programme will analyse the subjects that applicants have passed in their previous bachelor’s degree and master’s degree studies and assess their relation with the area of optics, so that they can determine whether they need to take bridging courses. If students have to take bridging courses, the research line and research group in which they will prepare the doctoral thesis will be considered, according to the procedure explained in Section 3.2. Bridging courses can be taken during the first year.

Bridging courses are selected mainly from the master’s degree in Photonics, which is the master’s degree associated with the programme.

Below, the subjects from this master’s degree are listed that are most suitable for bridging courses in the doctoral programme in Optical Engineering:
• Laser Systems and Applications: 3 ECTS
• Building Optomechanical Systems: 3 ECTS
• Managing Light with Devices: 3 ECTS
• Measuring with Light: 3 ECTS
• Nonlinear Optics: 3 ECTS
• Visual Biophotonics and Multispectral Imaging: 3 ECTS
• Image Processing in Biophotonics: 3 ECTS

Enrolment period for new doctoral students

From the end of September to mid-October.

More information at the registration section for new doctoral students

Enrolment period

From the end of September to mid-October.

More information at the general registration section

Monitoring and evaluation of the doctoral student

Procedure for the preparation and defense of the research plan

Doctoral candidates must submit a research plan, which will be included in their doctoral student activity report, before the end of the first year. The plan may be improved over the course of the doctoral degree. It must be endorsed by the tutor and the supervisor, and it must include the method that is to be followed and the aims of the research.

At least one of these annual assessments will include a public presentation and defence of the research plan and work done before a committee composed of three doctoral degree holders, which will be conducted in the manner determined by each academic committee. The examination committee awards a Pass or Fail mark. A Pass mark is a prerequisite for continuing on the doctoral programme. Doctoral candidates awarded a Fail mark must submit a new research plan for assessment by the academic committee of the doctoral programme within six months.

The committee assesses the research plan every year, in addition to all of the other activities in the doctoral student activity report. Doctoral candidates who are awarded two consecutive Fail marks for the research plan will be obliged to definitely withdraw from the programme.

If they change the subject of their thesis, they must submit a new research plan.

Formation activities

Activity: Tutorial.
- Hours: 288.
- Type: compulsory.

Activity: Mobility.
- Hours: 480.
- Type: optional.

Activity: Assessment based on doctoral student activity report (DAD) and research plan.
- Hours: 4.
- Type: compulsory.

Activity: Training in information skills.
- Hours: 1.5.
- Type: compulsory.

Activity: Research methodology.
- Hours: 12.
- Type: compulsory.

Activity: Courses and seminars, special courses given by visiting lecturers.
- Hours: 20.
- Type: optional.

Activity: Workshops.
- Hours: 48.
- Type: optional.

Activity: Publications.
- Hours: 160.
- Type: compulsory.

Activity: Thematic networks mobility.
- Hours: 40.
- Type: optional.

Activity: Meetings with visiting lecturers
- Hours: 6.
- Type: optional.

Activity: Projects.
- Hours: 96.
- Type: compulsory.

Procedure for assignment of tutor and thesis director

The academic committee of the doctoral programme assigns a thesis supervisor to each doctoral candidate when they are admitted or enrol for the first time, taking account of the thesis supervision commitment referred to in the admission decision.

The thesis supervisor will ensure that training activities carried out by the doctoral candidate are coherent and suitable, and that the topic of the candidate’s doctoral thesis will have an impact and make a novel contribution to knowledge in the relevant field. The thesis supervisor will also guide the doctoral candidate in planning the thesis and, if necessary, tailoring it to any other projects or activities undertaken. The thesis supervisor will generally be a UPC professor or researcher who holds a doctoral degree and has documented research experience. This includes PhD-holding staff at associated schools (as determined by the Governing Council) and UPC-affiliated research institutes (in accordance with corresponding collaboration and affiliation agreements). When thesis supervisors are UPC staff members, they also act as the doctoral candidate’s tutor.

PhD holders who do not meet these criteria (as a result of their contractual relationship or the nature of the institution to which they are attached) must be approved by the UPC Doctoral School's Standing Committee in order to participate in a doctoral programme as researchers with documented research experience.

The academic committee of the doctoral programme may approve the appointment of a PhD-holding expert who is not a UPC staff member as a candidate’s thesis supervisor. In such cases, the prior authorisation of the UPC Doctoral School's Standing Committee is required. A UPC staff member who holds a doctoral degree and has documented research experience must also be proposed to act as a co-supervisor, or as the doctoral candidate’s tutor if one has not been assigned.

A thesis supervisor may step down from this role if there are justified reasons (recognised as valid by the committee) for doing so. If this occurs, the academic committee of the doctoral programme will assign the doctoral candidate a new thesis supervisor.

Provided there are justified reasons for doing so, and after hearing any relevant input from the doctoral candidate, the academic committee of the doctoral programme may assign a new thesis supervisor at any time during the period of doctoral study.

If there are academic reasons for doing so (an interdisciplinary topic, joint or international programmes, etc.) and the academic committee of the programme gives its approval, an additional thesis supervisor may be assigned. Supervisors and co-supervisors have the same responsibilities and academic recognition.

The maximum number of supervisors of a doctoral thesis is two: a supervisor and a co-supervisor.

For theses carried out under a cotutelle agreement or as part of an Industrial Doctorate, if necessary and if the agreement foresees it this maximum number of supervisors may not apply. This notwithstanding, the maximum number of supervisors belonging to the UPC is two.

More information at the PhD theses section

Permanence

The academic committee of the programme may authorise an extension of up to one year for full-time doctoral candidates who have not applied to deposit their thesis by the end of the three-year period of study, in the terms outlined in the Academic Regulations for Doctoral Studies of the Universitat Politècnica de Catalunya. In the case of part-time candidates, an extension of two years may be authorised. In both cases, in exceptional circumstances a further one-year extension may be granted by the Doctoral School's Standing Committee, upon the submission of a reasoned application by the academic committee of the doctoral programme.

A doctoral candidate may be dismissed from a doctoral programme for the following reasons:

  • The doctoral candidate submitting a justified application to withdraw from the programme.
  • The maximum period of study and of extensions thereof ending.
  • The doctoral candidate not having enrolled every academic year (unless he or she has been authorised to temporarily withdraw).
  • The doctoral candidate failing two consecutive assessments.
  • The doctoral candidate having disciplinary proceedings filed against him or her that rule that he or she must be dismissed from the UPC.

Dismissal from the programme implies that doctoral candidates cannot continue studying at the UPC and the closing of their academic record. This notwithstanding, they may apply to the academic committee of the programme for readmission and the committee must reevaluate them in accordance with the criteria established in the regulations.

International Mention

The doctoral degree certificate may include International Doctorate mention. In this case, the doctoral candidate must meet the following requirements:

a) During the period of study leading to the award of the doctoral degree, the doctoral candidate must have spent at least three months at a respected higher education institution or research centre outside Spain to complete courses or do research work. The stays and activities carried out must be endorsed by the thesis supervisor and authorised by the academic committee of the programme. The candidate must provide a certifying document issued by the person responsible for the research group of the body or bodies where the stay or activity was completed. This information will be added to the doctoral student’s activity report.
b) Part of the thesis (at least the summary and conclusions) must be written and presented in one of the languages commonly used for science communication in the relevant field of knowledge, which must not be an official language of Spain. This rule does not apply to stays and reports in Spanish or to experts from Spanish-speaking countries.
c) At least two PhD-holding experts belonging to a higher education institution or research centre outside Spain must have issued officially certified reports on the thesis.
d) The thesis examination committee must have included at least one PhD-holding expert from a higher education or research institution outside Spain who was not responsible for the candidate’s stay abroad (point a) above).
e) The thesis defence must have taken place on UPC premises or, in the case of joint programmes, at the location specified in the collaboration agreement.

Learning resources

The doctoral programme in Optical Engineering is taught continuously and satisfactorily. Students have access to material resources (research laboratories, offices, specific research resources, computer resources, a mechanical and electronic workshop) belonging to the department and CD6 research centre that are involved. General UPC services are also available (computer, audiovisual, university libraries).

The GOAPI research group is situated in the Department of Optics and Optometry in the TR8 building of the Terrassa Campus, UPC. It has two research laboratories (a total of 114 m²) equipped for optical and digital image processing and other optical signals, and funded through public and private projects. It also has an office exclusively for doctoral students (25 m²). In addition, doctoral students can use meeting rooms and classrooms of various sizes in the TR8 building for meetings, courses or seminars. All these rooms are fully equipped.

The GREO research group is in CD6, housed in the TR11 building of the Terrassa Campus of the UPC. It has five research laboratories (a total of 310 m²), equipped with the basic and specialised material required to carry out the projects that are undertaken there, funded through public and private research projects. It also has a prototype room of 60 m² for the integration, adjustment and testing of devices designed and constructed in CD6. It is situated close to the workshops and has all the services required for its function. For grantholders, there is an office exclusively for doctoral students (60 m²) and an office shared with the teaching and research staff (80 m²). In addition, in CD6 there are two meeting rooms and a classroom-library where meetings, courses and seminars are held. All of these areas are perfectly equipped.

In addition, the mechanical and electronic workshops of the Department of Optics and Optometry are found in CD6. These workshops occupy a total space of 110 m² and have cutting-edge equipment to support the design and construction of projects. The mechanical workshop has machine tools and measuring instruments that are suitable for the work that is carried out. The electronics workshop has development tools for families of microcontrollers of 8 and 16 bits and to develop programmable logic, types CPLD and FPGA.

The DONLL research group is in the Gaia (TR14) research building of the Terrassa Campus, UPC. It has two research laboratories (total of 50 m²) that are fully equipped to carry out nonlinear optical and laser dynamics experiments (optical spectrum analyser, RF analyser, oscilloscope, signal generators, etc.), funded through public and private projects.. It also has three offices for doctoral students (50 m²). Doctoral students can also use two meeting rooms (Gaia building) and classrooms (in ETSEIAT) of various sizes, for meetings, courses and seminars. All of these are perfectly equipped (one room has videoconference equipment).

The VOS emerging research group (Vision, Optometry and Health) is in the Clínica Universitaria de la Visión (CUV; TR30), where much of the research work is carried out. The members of the VOS have various units available to them that are perfectly equipped to carry out mainly clinical research. Some notable units are those of Vision and Learning, Contact Lenses and Low Vision.

Finally, the TIEG research group is situated in the TR2 building of the Terrassa Campus, UPC. It has five research laboratories (a total of 135 m²), equipped with the basic and specialised material required to carry out the projects that are undertaken there, funded through public and private research projects. It also has an office shared with teaching and research staff for doctoral students.

All the research groups earmark part of their funding from public and private projects for doctoral students, so that they can complement their training by attending conferences, seminars and other training activities; and participate in meetings of thematic networks, projects, workshops, etc. Another factor that favours the mobility of doctoral students is that the programme belongs to various thematic networks. In addition, for several years, our doctoral students have benefited from mobility grants that have been awarded by the Ministry of Education. As the programme has an Excellence Award, the students have also taken part in specific calls to promote the mobility of students and lecturers.

Doctoral Theses

List of authorized thesis for defense

No hi ha registres per mostrar.

Last update: 27/02/2021 06:03:59.

List of lodged theses

No hi ha registres per mostrar.

Last update: 27/02/2021 06:03:16.

List of defended theses by year

No hi ha registres per mostrar.

Last update: 27/02/2021 06:02:46.

Theses related publications

AUTHOR:MAS AIXALA, ENRIC
Title:Caracterització dels paràmetres corneals per a l'adaptació de lents de contacte en casos de queratocon
Reading date:12/07/2019
Director:LUPON BAS, NURIA
Co-director:GISPETS PARCERISAS, JOAN
Mention:No
RELATED PUBLICATIONS
Gispets, J.; Mas, E.; Lupon, N.; Cardona, G. (2019). PERIPHERAL CORNEAL CHARACTERIZATION FOR LARGE DIAMETER CORNEAL CONTACT LENSES FITTING IN A PATIENT WITH KERATOCONUS.

AUTHOR:MESTRE FERRER, CLARA
Title:Development of new methodologies for the clinical, objective and automated evaluation of visual function based on the analysis of ocular movements. Application in visual health
Reading date:24/05/2019
Director:PIERRE GAUTIER, JOSSELIN MAËL
Director:PUJOL RAMO, JAUME
Mention:Mention de Doctor Internacional
RELATED PUBLICATIONS
Mestre, C.; Gautier, J.; Bedell, H.; Diaz, F.; Pujol, J. (2019). Characteristics of saccades when testing the near point of convergence.

AUTHOR:ARGILÉS SANS, MARC
Title:Estudi del parpelleig en usuaris/es de pantalles digitals. Anàlisi d'estratègies pel condicionament del parpelleig i la distància de manera no intrusiva
Reading date:09/07/2018
Director:CARDONA TORRADEFLOT, GENIS
Director:PEREZ CABRE, ELISABET
Mention:No
RELATED PUBLICATIONS
Argiles, M.; Quevedo, L. (2019). Videojuegos de acción como herramienta para mejorar las habilidades visuales. - Gaceta de optometría y óptica oftálmica, ISSN: 2173-9366

Argiles, M.; Sabi, R.; Marques, M.S. (2018). Analysis of the minerals used for ocular remedies in Ancient Egypt.

Fransoy, M.; JIMÉNEZ, J.; Galvez, M.; Argiles, M. (2019). Improving visual skills by combining auditory stimulation and vision theraphy.

Argiles, M.; Arteche, S.; Baldrich, N.; Mestre, A.; Prat, M.; Sunyer, B.; Viera, G. (2019). Fusional vergences and their relationship with near work time and distance in a children and young adults catalan population.

Mestre, A.; Auge, M.; Argiles, M. (2019). Differences in visual perception skills and eye movements in children with and without reading problems.

AUTHOR:OTERO MOLINS, CARLOS
Title:Lens-based technologies to study accommodation and refraction
Reading date:19/01/2018
Director:ALDABA AREVALO, MIKEL
Director:PUJOL RAMO, JAUME
Mention:Mention de Doctor Internacional
RELATED PUBLICATIONS
Otero, C.; Aldaba, M.; Lopez, S.; Diaz, F.; Vera-Diaz, F.; Pujol, J. (2018). Random changes of accommodation stimuli: an automated extension of the flippers accommodative facility test. - Current eye research, ISSN: 0271-3683 (JCR Impact Factor-2018: 1.672; Quartil: Q3)

Otero, C.; Aldaba, M.; Pujol, J. (2018). Clinical evaluation of an automated subjective refraction method implemented in a computer-controlled motorized phoropter. - Journal of Optometry, ISSN: 1888-4296 (JCR Impact Factor-2018: 0.83; Quartil: Q1)

Mestre, C.; Otero, C.; Diaz, F.; Gautier, J.; Pujol, J. (2018). An automated and objective cover test to measure heterophoria. - PloS one, ISSN: 1932-6203 (JCR Impact Factor-2018: 2.776; Quartil: Q2)

Mestre, C.; Otero, C.; Diaz, F.; Gautier, J.; Pujol, J. (2018). Repeatability and agreement of an automated and objective cover test.

Pujol, J.; Otero, C.; Aldaba, M.; Lopez, S.; Diaz, F.; Vera-Diaz, F. (2018). An automated accommodative facility test with unpredictable stimuli.

Mestre, C.; Otero, C.; Diaz, F.; Gautier, J.; Pujol, J. (2018). An automated and objective cover test to measure phoria.

Mestre, C.; Otero, C.; Diaz, F.; Gautier, J.; Pujol, J. (2018). Phoria measurement with an automated and objective cover test.

AUTHOR:DELPUEYO ESPAÑOL, XANA
Title:Development of a New Spectral Imaging System for the Diagnosis of Skin Cancer
Reading date:06/11/2017
Director:VILASECA RICART, MERITXELL
Co-director:ROYO ROYO, SANTIAGO
Mention:Mention de Doctor Internacional
RELATED PUBLICATIONS
Rey, L.; Burgos, Francisco J.; Delpueyo, X.; Ares, M.; Royo, S.; Malvehy, J.; Puig, S.; Vilaseca, M. (2018). Visible and extended near-infrared multispectral imaging for skin cancer diagnosis. - Sensors, ISSN: 1424-8220 (JCR Impact Factor-2018: 3.031; Quartil: Q1)

AUTHOR:MARTINEZ RODA, JUAN ANTONIO
Title:Nuevas contribuciones para la medida objetiva de la difusión intraocular y su aplicación clínica
Reading date:27/04/2017
Director:VILASECA RICART, MERITXELL
Co-director:PUJOL RAMO, JAUME
Mention:No
RELATED PUBLICATIONS
Mercadal Quesada, Nayara (2017). Pla de viabilitat d'una empresa d'òptica.

Urgeles Valldeperas, Mariona (2017). Influència de la personalització de la muntura en l'adaptació de lents d'addició progressiva.

Santos, P.; Vilaseca, M.; Martinez-Roda, J.A.; Ondategui-Parra, JC; Diaz, F.; Pujol, J. (2017). Novel system for measuring the scattering associated to the cornea and the lens.

Research projects

START DATEEND DATEACTIVITYFINANCING ENTITY
01/06/202031/05/2023Generación Óptica de Armónicos en Materiales Estratégicos para la NanofotónicaAGENCIA ESTATAL DE INVESTIGACION
31/03/202031/03/2020METHOD AND COMPUTER PROGRAMS FOR CHARACTERIZING OCULAR ACCOMMODATION
27/03/202027/03/2020METHOD, SYSTEM AND COMPUTER PROGRAMS FOR THE AUTOMATIC COUNTING OF THE NUMBER OF INSECTS IN A TRAP
27/03/202027/03/2020DISPOSITIVO PARA EL CONTAJE AUTOMÁTICO DEL NÚMERO DE INSECTOS EN UNA TRAMPA
01/01/202031/12/2020Living lab e-micromobilityEUROPEAN INST OF INNOV.& TECHNOL.
13/12/201901/09/2020Realització del projecte de recerca consistents en un treball d’acompanyament metodològic a la recerca “Procés de recerca-acció entre joves i adolescents llegides com a musulmanes en els centres educaOBSERVATORI DE LA SALUT VISUAL
12/12/201929/05/2020Comparative optical bench analysis of a new extended range of vision intraocular lensBAUSCH + LOMB FRANCE, S.A.
17/10/201917/10/2021Sistema intel.ligent basat en fotònica per a la gestió integrada de plaguesACC10
20/09/201919/09/2021Analysis of second and third harmonic generation in absorptive materialsUS ARMY RDECOM
27/06/201931/01/2020Desenvolupar els continguts del programa formatiu per Muralla Òptica d'acord amb els requeriments i impartir un curs de 24 horesMURALLA OPTICA, S.L.
27/06/201915/01/2020Programa de formació per Rueda CollellRUEDA-COLLELL OPTICS, S.L.
01/06/201931/12/2020Aprendizaje automático y análisis de datos para tecnologías fotónicas biomédicasAGENCIA ESTATAL DE INVESTIGACION
17/05/201917/05/2019A computer implemented method, a system and computer programs for anomaly detection using network analysis
01/05/201931/10/2022Vision and Identification Z-sensing Technology and ApplicationsCommission of European Communities
01/05/201930/04/2022Aplicaciones y tecnologías de visión e identificación en profundidadAGENCIA ESTATAL DE INVESTIGACION
29/04/201929/05/2019Validación, revisión y mejora de algoritmaos de estimulación de función visualE-HEALTH TECHNICAL SOLUTIONS SL
01/03/201928/02/2023Climate Advanced Forecasting of sub-seasonalCommission of European Communities
01/03/201928/02/2022Desenvolupament d'una plataforma d'Imatge Multimodal basada en Lidar 3D (LIDAR+)AGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
01/01/201930/06/2019Serveis d'assessorament a IDNEO relacionats amb l'ús aplicació de tecnologies fotòniquesIDNEO TECHNOLOGIES SAU
01/01/201931/12/2021Sistemas dinámicos complejos y herramientas avanzadas de análisis de datosAGENCIA ESTATAL DE INVESTIGACION
01/01/201931/12/2021001-P-001646_BASE 3DGENCAT - DEPT. D'EMPRESA I OCUPACIO
01/01/201931/12/2022Accelerating Photonics Deployment via one Stop Shop Advanced Technology Access for ResearchersEuropean Comission
01/12/201801/06/2020Enfortiment de les accions per a l'abordatge de la baixa visió a Colòmbia en el marc de la ruta d’atenció integral en salut visual definida en la política integral d'atenció en Salud – PaísAjuntament de Cerdanyola del Vallès
30/11/201810/01/2019Disseny d'una lent de Fresnel per un instrument regulador de fars d'automòbilCONSTRUCCIONES ELÉCTRICAS LUJAN, SA
29/11/201814/12/2018Caracterización y análisis de lentes intraoculares trifocales en banco ópticoUniversitat Politècnica de Catalunya; Oftaltech Solutions, S.L.U
18/10/201814/12/2018Caracterización y análisis de lentes intraoculares trifocales en banco òpticoOFTALTECH SOLUTIONS S.L.U.
07/09/201831/03/2019CLICA: Desarrollo de un prototipo industrial de cámara LIDAR, elemento clava en el desarrollo del vehículo autónomoMIN. INDUSTRIA ENERGIA TURISMO
07/09/201831/03/2019Desarrollo de un equipo que mejore la eficiencia del control integrado de plagas en la producción de cítricos - ELECTRONIC PEST CONTROL REDSCALE II - 2a FASEMIN. INDUSTRIA ENERGIA TURISMO
05/09/201804/09/2019Realització de l'assessorament, anàlisis, assaig en el camp de la optometria, colorimetira i disseny òpticZANINI AUTO GRUP, S.A.
01/09/201828/02/2022Flexible Optical Injection Moulding of optoelectronic devicesCommission of European Communities
01/09/201831/08/2019Fortalecimiento y actualización del Marco Estratégico para el Abordaje de la Baja Visión irreversible en ColombiaAjuntament de Terrassa
03/07/201803/07/2018Lidar system and lidar method for a motor vehicle
21/06/201821/06/2018A vision system and vision method for a vehicle
15/06/201814/06/2019Subvenció US ARMY W911NF1810259US ARMY RDECOM
01/06/201831/12/2020Dissenyar i construir un prototip de sistema multimodal que inclogui la imatge lidar.BEAMAGINE, SL
01/06/201830/05/2019El objecto del contrato es la realización del proyecto de I+D consistente en la aplicación de técnicas de caracterización de haces de luz emitidos por láseres de semiconductorMONOCROM, S.L.
01/06/201830/09/2018Estudi sobre la conceptialització de lents de contacte personalitzades fabricades amb noves tecnologiesFUNDACIO DE RECERCA DE L INSTITUT D
17/04/201821/03/2019Suport tècnic en l'àmbit de l'ús de compoenents òptics, càmeres, sensors i d'altres components optoelectrònics en diferents projectesIDNEO TECHNOLOGIES SAU
01/03/201828/02/2019CCD 2018-001 Fortalecimiento y actualización del Marco Estratégico para el Abordaje de la Baja Visión reversible en ColombiaCentre de Cooperació per al Desenvolupament , UPC
01/02/201801/02/2020Real-time system to measure accommodation dynamicsACC10
24/01/201824/01/2018Method and device for confocal measurement of displacement, velocity or flow at a point of a sample and uses thereof
01/01/201831/12/2020Sensores láser mejorados en medios dispersores mediante polarizaciónAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Ingeniería fotónica para el diagnóstico, seguimiento y tratamiento de enfermedades oculares y sanguíneasAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Actualización y ampliación del ordenador paralelo del campus de Terrassa de la UPCAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Developing and implementing the Next European Photonics21 industrial PPP StrategyEuropean Commission
11/12/201711/12/2017Image processing method for glaucoma detection and computer program products thereof
13/11/201713/03/2018Characteritzation optical quality IOlsBAUSCH + LOMB FRANCE, S.A.
13/11/201731/10/2018Polychromatic characterization and comparative analysis of multifocal intraocular lenses in optical benchBausch+Lomb France, S.A
01/11/201701/11/2018Detección precoz del Cáncer de Piel con Tecnologías Multiespectral y 3DAjuntament de Terrassa
01/11/201731/10/2021ACceleraTing PHotonics innovAtion for SME’s: aEuropean Commission
20/10/201719/08/2018Coordinació seminaris islamofòbiaOBSERVATORI DE LA SALUT VISUAL
10/10/201731/03/2018Activitats de suport a les tasques de coordinació i dinamització de la Secretaria Tècnica de la Plataforma Tecnològica FOTONICA21ASOC INVESTIGACIÓN METALÚRGICA DEL
01/10/201730/09/2018Contribució a la implementació d’un sistema eficaç i sostenible de defensa i promoció dels Drets Sexuals i Reproductius amb EGiBDH en els barris desafavorits de la regió de DakarAgència Catalana de Cooperació al Desenvolupament (Accd).
01/10/201730/09/2018Suport a l’emprenedoria i reinserció socioeconòmica de dones supervivents a la violència masclista de Kaolack (Senegal) pel seu empoderament i vida lliure de violènciesAjuntament de Terrassa
18/09/201717/01/2018PICVISACALAF INDUSTRIAL, SL
01/09/201731/08/2018Dones lliures de violència i islamofòbia en territoris de pauAgència Catalana de Cooperació al Desenvolupament (Accd).
01/09/201731/03/2019Enhanced absorption in stopped-light photonic nanostrucutres: application to efficient sensingVILNIUS UNIVERSITY
21/07/201722/07/2019Micro-injection Machine for Photonic Integrated Circuits encapsulations with optical performance using thermoplastic materialsAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
14/07/201714/07/2017A vision system and a vision method for a vehicle
14/07/201714/07/2017A vision system and method for a vehicle
14/07/201714/07/2017A vision system and method for a vehicle (2)
14/07/201714/07/2017A vision system and a vision method for a vehicle(2)
01/07/201730/06/2018Resistències a la islamofòbia amb ulls de donesAjuntament de Barcelona
16/06/201731/03/2018Desarrollo de un equipo que mejore la eficiencia del control integrado de plagas en la producción de cítricos - ELECTRONIC PEST CONTROL, REDSCALEMIN. INDUSTRIA ENERGIA TURISMO
15/06/201731/10/2019H202 SENSORANTONIO MATACHANA, S.A.
06/05/201706/05/2017Método para determinar la dinámica de la película lagrimal y productos de programa de ordenador del mismo
06/05/201706/05/2017Método para medir la difusión intraocular que afecta a diferentes medios oculares del ojo y productos de programa de ordenador del mismo
01/04/201730/03/2018LIDAR2017 Dissenyar i construir un prototip de sistema d'imatge lidar i explorar configuracions complementàries per la seva aplicació en entorns ambientals hostilsBEAMAGINE, SL
30/03/201730/03/2017Method, device and computer programs for measuring a fetal arterial pulse wave
01/03/201728/02/2018Suport a la promoció dels drets de les dones a través de la seva participació a les polítiques públiques i de la seva implicació com agent de salut comunitari a DakarCentre de Cooperació per al Desenvolupament , UPC
17/02/201731/12/2017Characteritzation of the optical quality of miltifocal intraocular lensesBAUSCH + LOMB FRANCE, S.A.
15/02/201724/07/2017Characterization of the optical quality of multifocal intraocular lensesBausch+Lomb France, S.A
31/01/201731/01/2017Método, sistema y programa de ordenador para la medida de la difusión de la luz en el globo o región ocular
30/01/201730/01/2017System and method for characterizing, designing and/or modifying optical properties of a lens
20/01/201720/01/2017A computer implemented method, a system and computer program products to characterize a skin lesion
16/01/201704/04/2017Realització d'un informe sobre l'estat de la visió d'una mostra de població conductoraVISIÓN Y VIDA
01/01/201731/07/2018DAVALOR AdhesióDAVALOR SALUD, S.L
01/01/201731/12/2021ICREA ACADEMIA 2016-04INSTITUCIO CAT DE RECERCA I
30/12/201629/12/2019Lentes intraoculares avanzadas: diseño, calidad óptica y repercusión clínicaMIN DE ECONOMIA Y COMPETITIVIDAD
22/12/201621/12/2017I-CEF Organitzar un concurs d'emprenedoria fotónicaAjuntament de Terrassa
07/12/201607/12/2016Method and Apparatus for measuring the collimated transmittance of a semi-transparent body
02/12/201601/09/2017Conveni UBIKWA ToFUBIKWA SYSTEMS SLU
15/10/201614/10/2019Optometry Curriculum Update for Lifelong Learning through ErasmusEuropean Commission
01/10/201631/12/2020Desarrollo de un sistema industrial de grabación de redes de difracción/polarización para su aplicación en encóderes con láse de femtosegundoMIN DE ECONOMIA Y COMPETITIVIDAD
01/10/201630/06/2019Desarrollo de un nuevo proceso industrial apara obtener divisores de haz fotocrómicos para multiplexores de fibra óptica de plásticoMIN DE ECONOMIA Y COMPETITIVIDAD
01/10/201631/03/2019High Power Composites of Edge Emitting Semiconductor LasersEuropean Union Horizon 2020
05/09/201604/03/2018W911NF-16-1-0563 US ARMY ACC-APG-RTPUS ARMY RDECOM
01/09/201630/06/2019Desarrollo de sistemas para la caracterización de infraextructuras ferroviarias mediante imagen Lidar (CIFIL)MIN DE ECONOMIA Y COMPETITIVIDAD
01/09/201631/03/2019Sistema de visualización de realidad aumentada para casco de motocicletaMIN DE ECONOMIA Y COMPETITIVIDAD
18/08/201618/08/2016Método y dispositivo para determinar la refracción subjetiva ocular de forma automatizada
20/07/201620/07/2016Dispositivo electro-óptico para explorar el comportamiento de los ojos ante estímulos visuales externos
20/07/201620/07/2016Dispositivo y procedimiento para el registro de imágenes del fondo ocular
01/07/201631/12/2017Implementing the European Photonics21 PPP strategyCommission of European Communities
12/05/201630/06/2016Assessment agreement LIDAR Exhibit BAUTOLIV DEVELOPMENT AB
12/05/201631/08/2016Assessment agreement LIDAR Exhibit AAUTOLIV DEVELOPMENT AB
01/03/201630/11/2016Formació per foment reducció desigualtatOBSERVATORI DE LA SALUT VISUAL
16/02/201615/02/2019Quality check of optical elements manufactured with in-mould hybrid integration techniqueAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
05/02/201605/02/2016Método y programa de ordenador para analizar la difusión ocular
30/01/201629/01/2017Suport a la promoció dels drets de les dones a través de la seva participació a les polítiques públiques i de la seva implicació com agent de salut comunitari a Dakar, SenegalAgència Catalana de Cooperació al Desenvolupament (Accd).
01/01/201631/12/2017TECSPR-15-1-0049 - Tear film evaluation with speckle interferometryACC10
01/01/201631/12/2018Ondas de luz en cristales, medios estructurados y metamaterialesMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201631/12/2018Sistemas físicos y biofísicos complejos: hacia una visió global de su dinámica y fluctuacionesMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201631/12/2020ICREA ACADEMIA 2015-04INSTITUCIO CAT DE RECERCA I
01/01/201631/12/2018Nano structures for Highly Efficient Infrared DetectionNATO Science for Peace and Security Programme
15/12/201514/12/2016CAREF ORBITAL 40 - Pla operatiu del "Centre d'alt rendiment en emprenedoria fotònica"Ajuntament de Terrassa
01/12/201530/11/2016Fortalecimiento a los comités locales de discapacidad para la visibilización de la baja visión en las políticas públicas a través del acompañamiento de las Redes UNESCOVISION Colombia y UNESCOVISION jóvenesAjuntament de Cerdanyola del Vallès
01/12/201530/12/2016Apoyo a la creación de microemprendimientos de mujeres para el fortalecimiento de los servicios de salud ocular en Dakar, Senegal.Centre de Cooperació per al Desenvolupament , UPC
01/12/201528/02/2017Sensibilització a joves sobre desigualtats en salut visual i discapacitat i les propostes de milloraAjuntament de Terrassa
30/11/201529/11/2016Promoción de los derechos de las personas con discapacidad para el desarrollo de competencias productivas en el municipio de Santa TeclaAjuntament de Terrassa
01/10/201530/09/2019Advanced biomedical optical imaging and data analysisCommission of European Communities
22/07/201531/03/2016AEI-010500-2015-238MIN. INDUSTRIA ENERGIA TURISMO
22/07/201531/03/2016AEI-010500-2015-246MIN. INDUSTRIA ENERGIA TURISMO
30/06/201529/06/2016Sensibilització a estudiants de secundaria sobre iniquitats i sostenibilitat en base a la metodologia d’aprenentatge per serveis (APS)Ajuntament de Terrassa
01/06/201530/04/2016HDA-QS Development of new capabilities related to optical quality measurement and scattering monitoring to be added to the HD AnalyzerVISIOMETRICS, S.L.
01/06/201531/12/2015MLF/'Medida del latido fetal/'PCB INFORMÁTICA Y CONTROL, S.L.
12/05/201511/12/2015A photonic based biosensor with plasmonic accuracy at low costAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
04/05/201503/07/2015Programa formatiu Muralla ÒpticaMURALLA OPTICA, S.L.
15/04/201530/06/2015Carril multisensor-Desenvolupament d'un sistema multisensor per pulsioximetria avançadaCARRIL CABLES Y SENSORES SL
03/03/201502/03/2018Novel system for measuring the intraocular scattering associated to the cornea and the lensAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
24/02/201531/12/2018RTC-2015-3954-8 Desarrollo de un nuevo proceso industrial para el encapsulado de dispositivos electroópticos para sistemas distribuidos de información de amplio ancho de bandaMIN DE ECONOMIA Y COMPETITIVIDAD
06/02/201506/02/2015Optical system and method dor ultrashort laser pulse characterization
19/01/201531/01/2016Activitats formatives Baush&LombBAUSCH&LOMB, S.A.
14/01/201513/01/2018Device and strategy for energy surface measurementAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
01/01/201531/12/2017DPI2014-56881-R Técnicas de seccionado óptico utilizando interferometría autorrealimentada: aplicaciones en biofotónicaMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201531/12/2017DPI2014-56850-R Biofotónica y tecnología de imagen hiperespectral aplicadas a la salud visual y al investicación del cáncer de pielMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201531/12/2017Procesos de auto-organización inducidos por laser de femtosegundos para aplicaciones fotónicas: migración iónica y estructuración por ondas de superfície. TEC2014-52642-C2-1-R.Ministerio de Economia y Competitividad

Teaching staff and research groups

Research projects

START DATEEND DATEACTIVITYFINANCING ENTITY
01/06/202031/05/2023Generación Óptica de Armónicos en Materiales Estratégicos para la NanofotónicaAGENCIA ESTATAL DE INVESTIGACION
31/03/202031/03/2020METHOD AND COMPUTER PROGRAMS FOR CHARACTERIZING OCULAR ACCOMMODATION
27/03/202027/03/2020METHOD, SYSTEM AND COMPUTER PROGRAMS FOR THE AUTOMATIC COUNTING OF THE NUMBER OF INSECTS IN A TRAP
27/03/202027/03/2020DISPOSITIVO PARA EL CONTAJE AUTOMÁTICO DEL NÚMERO DE INSECTOS EN UNA TRAMPA
01/01/202031/12/2020Living lab e-micromobilityEUROPEAN INST OF INNOV.& TECHNOL.
13/12/201901/09/2020Realització del projecte de recerca consistents en un treball d’acompanyament metodològic a la recerca “Procés de recerca-acció entre joves i adolescents llegides com a musulmanes en els centres educaOBSERVATORI DE LA SALUT VISUAL
12/12/201929/05/2020Comparative optical bench analysis of a new extended range of vision intraocular lensBAUSCH + LOMB FRANCE, S.A.
17/10/201917/10/2021Sistema intel.ligent basat en fotònica per a la gestió integrada de plaguesACC10
20/09/201919/09/2021Analysis of second and third harmonic generation in absorptive materialsUS ARMY RDECOM
27/06/201931/01/2020Desenvolupar els continguts del programa formatiu per Muralla Òptica d'acord amb els requeriments i impartir un curs de 24 horesMURALLA OPTICA, S.L.
27/06/201915/01/2020Programa de formació per Rueda CollellRUEDA-COLLELL OPTICS, S.L.
01/06/201931/12/2020Aprendizaje automático y análisis de datos para tecnologías fotónicas biomédicasAGENCIA ESTATAL DE INVESTIGACION
17/05/201917/05/2019A computer implemented method, a system and computer programs for anomaly detection using network analysis
01/05/201931/10/2022Vision and Identification Z-sensing Technology and ApplicationsCommission of European Communities
01/05/201930/04/2022Aplicaciones y tecnologías de visión e identificación en profundidadAGENCIA ESTATAL DE INVESTIGACION
29/04/201929/05/2019Validación, revisión y mejora de algoritmaos de estimulación de función visualE-HEALTH TECHNICAL SOLUTIONS SL
01/03/201928/02/2023Climate Advanced Forecasting of sub-seasonalCommission of European Communities
01/03/201928/02/2022Desenvolupament d'una plataforma d'Imatge Multimodal basada en Lidar 3D (LIDAR+)AGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
01/01/201930/06/2019Serveis d'assessorament a IDNEO relacionats amb l'ús aplicació de tecnologies fotòniquesIDNEO TECHNOLOGIES SAU
01/01/201931/12/2021Sistemas dinámicos complejos y herramientas avanzadas de análisis de datosAGENCIA ESTATAL DE INVESTIGACION
01/01/201931/12/2021001-P-001646_BASE 3DGENCAT - DEPT. D'EMPRESA I OCUPACIO
01/01/201931/12/2022Accelerating Photonics Deployment via one Stop Shop Advanced Technology Access for ResearchersEuropean Comission
01/12/201801/06/2020Enfortiment de les accions per a l'abordatge de la baixa visió a Colòmbia en el marc de la ruta d’atenció integral en salut visual definida en la política integral d'atenció en Salud – PaísAjuntament de Cerdanyola del Vallès
30/11/201810/01/2019Disseny d'una lent de Fresnel per un instrument regulador de fars d'automòbilCONSTRUCCIONES ELÉCTRICAS LUJAN, SA
29/11/201814/12/2018Caracterización y análisis de lentes intraoculares trifocales en banco ópticoUniversitat Politècnica de Catalunya; Oftaltech Solutions, S.L.U
18/10/201814/12/2018Caracterización y análisis de lentes intraoculares trifocales en banco òpticoOFTALTECH SOLUTIONS S.L.U.
07/09/201831/03/2019CLICA: Desarrollo de un prototipo industrial de cámara LIDAR, elemento clava en el desarrollo del vehículo autónomoMIN. INDUSTRIA ENERGIA TURISMO
07/09/201831/03/2019Desarrollo de un equipo que mejore la eficiencia del control integrado de plagas en la producción de cítricos - ELECTRONIC PEST CONTROL REDSCALE II - 2a FASEMIN. INDUSTRIA ENERGIA TURISMO
05/09/201804/09/2019Realització de l'assessorament, anàlisis, assaig en el camp de la optometria, colorimetira i disseny òpticZANINI AUTO GRUP, S.A.
01/09/201828/02/2022Flexible Optical Injection Moulding of optoelectronic devicesCommission of European Communities
01/09/201831/08/2019Fortalecimiento y actualización del Marco Estratégico para el Abordaje de la Baja Visión irreversible en ColombiaAjuntament de Terrassa
03/07/201803/07/2018Lidar system and lidar method for a motor vehicle
21/06/201821/06/2018A vision system and vision method for a vehicle
15/06/201814/06/2019Subvenció US ARMY W911NF1810259US ARMY RDECOM
01/06/201831/12/2020Dissenyar i construir un prototip de sistema multimodal que inclogui la imatge lidar.BEAMAGINE, SL
01/06/201830/05/2019El objecto del contrato es la realización del proyecto de I+D consistente en la aplicación de técnicas de caracterización de haces de luz emitidos por láseres de semiconductorMONOCROM, S.L.
01/06/201830/09/2018Estudi sobre la conceptialització de lents de contacte personalitzades fabricades amb noves tecnologiesFUNDACIO DE RECERCA DE L INSTITUT D
17/04/201821/03/2019Suport tècnic en l'àmbit de l'ús de compoenents òptics, càmeres, sensors i d'altres components optoelectrònics en diferents projectesIDNEO TECHNOLOGIES SAU
01/03/201828/02/2019CCD 2018-001 Fortalecimiento y actualización del Marco Estratégico para el Abordaje de la Baja Visión reversible en ColombiaCentre de Cooperació per al Desenvolupament , UPC
01/02/201801/02/2020Real-time system to measure accommodation dynamicsACC10
24/01/201824/01/2018Method and device for confocal measurement of displacement, velocity or flow at a point of a sample and uses thereof
01/01/201831/12/2020Sensores láser mejorados en medios dispersores mediante polarizaciónAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Ingeniería fotónica para el diagnóstico, seguimiento y tratamiento de enfermedades oculares y sanguíneasAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Actualización y ampliación del ordenador paralelo del campus de Terrassa de la UPCAGENCIA ESTATAL DE INVESTIGACION
01/01/201831/12/2020Developing and implementing the Next European Photonics21 industrial PPP StrategyEuropean Commission
11/12/201711/12/2017Image processing method for glaucoma detection and computer program products thereof
13/11/201713/03/2018Characteritzation optical quality IOlsBAUSCH + LOMB FRANCE, S.A.
13/11/201731/10/2018Polychromatic characterization and comparative analysis of multifocal intraocular lenses in optical benchBausch+Lomb France, S.A
01/11/201701/11/2018Detección precoz del Cáncer de Piel con Tecnologías Multiespectral y 3DAjuntament de Terrassa
01/11/201731/10/2021ACceleraTing PHotonics innovAtion for SME’s: aEuropean Commission
20/10/201719/08/2018Coordinació seminaris islamofòbiaOBSERVATORI DE LA SALUT VISUAL
10/10/201731/03/2018Activitats de suport a les tasques de coordinació i dinamització de la Secretaria Tècnica de la Plataforma Tecnològica FOTONICA21ASOC INVESTIGACIÓN METALÚRGICA DEL
01/10/201730/09/2018Contribució a la implementació d’un sistema eficaç i sostenible de defensa i promoció dels Drets Sexuals i Reproductius amb EGiBDH en els barris desafavorits de la regió de DakarAgència Catalana de Cooperació al Desenvolupament (Accd).
01/10/201730/09/2018Suport a l’emprenedoria i reinserció socioeconòmica de dones supervivents a la violència masclista de Kaolack (Senegal) pel seu empoderament i vida lliure de violènciesAjuntament de Terrassa
18/09/201717/01/2018PICVISACALAF INDUSTRIAL, SL
01/09/201731/08/2018Dones lliures de violència i islamofòbia en territoris de pauAgència Catalana de Cooperació al Desenvolupament (Accd).
01/09/201731/03/2019Enhanced absorption in stopped-light photonic nanostrucutres: application to efficient sensingVILNIUS UNIVERSITY
21/07/201722/07/2019Micro-injection Machine for Photonic Integrated Circuits encapsulations with optical performance using thermoplastic materialsAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
14/07/201714/07/2017A vision system and a vision method for a vehicle
14/07/201714/07/2017A vision system and method for a vehicle
14/07/201714/07/2017A vision system and method for a vehicle (2)
14/07/201714/07/2017A vision system and a vision method for a vehicle(2)
01/07/201730/06/2018Resistències a la islamofòbia amb ulls de donesAjuntament de Barcelona
16/06/201731/03/2018Desarrollo de un equipo que mejore la eficiencia del control integrado de plagas en la producción de cítricos - ELECTRONIC PEST CONTROL, REDSCALEMIN. INDUSTRIA ENERGIA TURISMO
15/06/201731/10/2019H202 SENSORANTONIO MATACHANA, S.A.
06/05/201706/05/2017Método para determinar la dinámica de la película lagrimal y productos de programa de ordenador del mismo
06/05/201706/05/2017Método para medir la difusión intraocular que afecta a diferentes medios oculares del ojo y productos de programa de ordenador del mismo
01/04/201730/03/2018LIDAR2017 Dissenyar i construir un prototip de sistema d'imatge lidar i explorar configuracions complementàries per la seva aplicació en entorns ambientals hostilsBEAMAGINE, SL
30/03/201730/03/2017Method, device and computer programs for measuring a fetal arterial pulse wave
01/03/201728/02/2018Suport a la promoció dels drets de les dones a través de la seva participació a les polítiques públiques i de la seva implicació com agent de salut comunitari a DakarCentre de Cooperació per al Desenvolupament , UPC
17/02/201731/12/2017Characteritzation of the optical quality of miltifocal intraocular lensesBAUSCH + LOMB FRANCE, S.A.
15/02/201724/07/2017Characterization of the optical quality of multifocal intraocular lensesBausch+Lomb France, S.A
31/01/201731/01/2017Método, sistema y programa de ordenador para la medida de la difusión de la luz en el globo o región ocular
30/01/201730/01/2017System and method for characterizing, designing and/or modifying optical properties of a lens
20/01/201720/01/2017A computer implemented method, a system and computer program products to characterize a skin lesion
16/01/201704/04/2017Realització d'un informe sobre l'estat de la visió d'una mostra de població conductoraVISIÓN Y VIDA
01/01/201731/07/2018DAVALOR AdhesióDAVALOR SALUD, S.L
01/01/201731/12/2021ICREA ACADEMIA 2016-04INSTITUCIO CAT DE RECERCA I
30/12/201629/12/2019Lentes intraoculares avanzadas: diseño, calidad óptica y repercusión clínicaMIN DE ECONOMIA Y COMPETITIVIDAD
22/12/201621/12/2017I-CEF Organitzar un concurs d'emprenedoria fotónicaAjuntament de Terrassa
07/12/201607/12/2016Method and Apparatus for measuring the collimated transmittance of a semi-transparent body
02/12/201601/09/2017Conveni UBIKWA ToFUBIKWA SYSTEMS SLU
15/10/201614/10/2019Optometry Curriculum Update for Lifelong Learning through ErasmusEuropean Commission
01/10/201631/12/2020Desarrollo de un sistema industrial de grabación de redes de difracción/polarización para su aplicación en encóderes con láse de femtosegundoMIN DE ECONOMIA Y COMPETITIVIDAD
01/10/201630/06/2019Desarrollo de un nuevo proceso industrial apara obtener divisores de haz fotocrómicos para multiplexores de fibra óptica de plásticoMIN DE ECONOMIA Y COMPETITIVIDAD
01/10/201631/03/2019High Power Composites of Edge Emitting Semiconductor LasersEuropean Union Horizon 2020
05/09/201604/03/2018W911NF-16-1-0563 US ARMY ACC-APG-RTPUS ARMY RDECOM
01/09/201630/06/2019Desarrollo de sistemas para la caracterización de infraextructuras ferroviarias mediante imagen Lidar (CIFIL)MIN DE ECONOMIA Y COMPETITIVIDAD
01/09/201631/03/2019Sistema de visualización de realidad aumentada para casco de motocicletaMIN DE ECONOMIA Y COMPETITIVIDAD
18/08/201618/08/2016Método y dispositivo para determinar la refracción subjetiva ocular de forma automatizada
20/07/201620/07/2016Dispositivo electro-óptico para explorar el comportamiento de los ojos ante estímulos visuales externos
20/07/201620/07/2016Dispositivo y procedimiento para el registro de imágenes del fondo ocular
01/07/201631/12/2017Implementing the European Photonics21 PPP strategyCommission of European Communities
12/05/201630/06/2016Assessment agreement LIDAR Exhibit BAUTOLIV DEVELOPMENT AB
12/05/201631/08/2016Assessment agreement LIDAR Exhibit AAUTOLIV DEVELOPMENT AB
01/03/201630/11/2016Formació per foment reducció desigualtatOBSERVATORI DE LA SALUT VISUAL
16/02/201615/02/2019Quality check of optical elements manufactured with in-mould hybrid integration techniqueAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
05/02/201605/02/2016Método y programa de ordenador para analizar la difusión ocular
30/01/201629/01/2017Suport a la promoció dels drets de les dones a través de la seva participació a les polítiques públiques i de la seva implicació com agent de salut comunitari a Dakar, SenegalAgència Catalana de Cooperació al Desenvolupament (Accd).
01/01/201631/12/2017TECSPR-15-1-0049 - Tear film evaluation with speckle interferometryACC10
01/01/201631/12/2018Ondas de luz en cristales, medios estructurados y metamaterialesMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201631/12/2018Sistemas físicos y biofísicos complejos: hacia una visió global de su dinámica y fluctuacionesMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201631/12/2020ICREA ACADEMIA 2015-04INSTITUCIO CAT DE RECERCA I
01/01/201631/12/2018Nano structures for Highly Efficient Infrared DetectionNATO Science for Peace and Security Programme
15/12/201514/12/2016CAREF ORBITAL 40 - Pla operatiu del "Centre d'alt rendiment en emprenedoria fotònica"Ajuntament de Terrassa
01/12/201530/11/2016Fortalecimiento a los comités locales de discapacidad para la visibilización de la baja visión en las políticas públicas a través del acompañamiento de las Redes UNESCOVISION Colombia y UNESCOVISION jóvenesAjuntament de Cerdanyola del Vallès
01/12/201530/12/2016Apoyo a la creación de microemprendimientos de mujeres para el fortalecimiento de los servicios de salud ocular en Dakar, Senegal.Centre de Cooperació per al Desenvolupament , UPC
01/12/201528/02/2017Sensibilització a joves sobre desigualtats en salut visual i discapacitat i les propostes de milloraAjuntament de Terrassa
30/11/201529/11/2016Promoción de los derechos de las personas con discapacidad para el desarrollo de competencias productivas en el municipio de Santa TeclaAjuntament de Terrassa
01/10/201530/09/2019Advanced biomedical optical imaging and data analysisCommission of European Communities
22/07/201531/03/2016AEI-010500-2015-238MIN. INDUSTRIA ENERGIA TURISMO
22/07/201531/03/2016AEI-010500-2015-246MIN. INDUSTRIA ENERGIA TURISMO
30/06/201529/06/2016Sensibilització a estudiants de secundaria sobre iniquitats i sostenibilitat en base a la metodologia d’aprenentatge per serveis (APS)Ajuntament de Terrassa
01/06/201530/04/2016HDA-QS Development of new capabilities related to optical quality measurement and scattering monitoring to be added to the HD AnalyzerVISIOMETRICS, S.L.
01/06/201531/12/2015MLF/'Medida del latido fetal/'PCB INFORMÁTICA Y CONTROL, S.L.
12/05/201511/12/2015A photonic based biosensor with plasmonic accuracy at low costAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
04/05/201503/07/2015Programa formatiu Muralla ÒpticaMURALLA OPTICA, S.L.
15/04/201530/06/2015Carril multisensor-Desenvolupament d'un sistema multisensor per pulsioximetria avançadaCARRIL CABLES Y SENSORES SL
03/03/201502/03/2018Novel system for measuring the intraocular scattering associated to the cornea and the lensAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
24/02/201531/12/2018RTC-2015-3954-8 Desarrollo de un nuevo proceso industrial para el encapsulado de dispositivos electroópticos para sistemas distribuidos de información de amplio ancho de bandaMIN DE ECONOMIA Y COMPETITIVIDAD
06/02/201506/02/2015Optical system and method dor ultrashort laser pulse characterization
19/01/201531/01/2016Activitats formatives Baush&LombBAUSCH&LOMB, S.A.
14/01/201513/01/2018Device and strategy for energy surface measurementAGAUR. Agència de Gestió d'Ajuts Universitaris i de Recerca
01/01/201531/12/2017DPI2014-56881-R Técnicas de seccionado óptico utilizando interferometría autorrealimentada: aplicaciones en biofotónicaMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201531/12/2017DPI2014-56850-R Biofotónica y tecnología de imagen hiperespectral aplicadas a la salud visual y al investicación del cáncer de pielMIN DE ECONOMIA Y COMPETITIVIDAD
01/01/201531/12/2017Procesos de auto-organización inducidos por laser de femtosegundos para aplicaciones fotónicas: migración iónica y estructuración por ondas de superfície. TEC2014-52642-C2-1-R.Ministerio de Economia y Competitividad

Quality

The Validation, Monitoring, Modification and Accreditation Framework (VSMA Framework) for official degrees ties the quality assurance processes (validation, monitoring, modification and accreditation) carried out over the lifetime of a course to two objectives—the goal of establishing coherent links between these processes, and that of achieving greater efficiency in their management—all with the overarching aim of improving programmes.

Validation

Monitoring

    Registry of Universities, Centers and Degrees (RUCT)

    Indicators

    Up